5.3.2 Setting Time-Series Measurement Stop Method - Hioki 3169-20 Instruction Manual

5.3 Setting on the Data Output Setting Screen (DATA OUTPUT)

5.3.2 Setting Time-Series Measurement Stop Method

Press the
Press the
NEXT
screen. (3169-20: SET UP 2/4, 3169-21: SET UP 2/5)
SCR
Move the cursor to "
Set the time-series measurement stop method using the function
MANUAL
keys.
TIME
TIMER
When the stop method is set to Time or Timer, if the
key is pressed during measurement, a message is displayed
requesting confirmation. Pressing the
surement immediately.
key to display the setting screen.
SET UP
(NEXT SCR) key to display the data output setting
F5
MEAS. STOP
MANUAL Manua lMeasurement stops when the
pressed (default setting).
TIME Measurement stops at the exact time set by users.
TIMER Measurement stops when the duration set by the users has
elapsed.
1 second to 8784 hours
."
START/STOP
(yes) key stops mea-
F1
71
1
2
3
4
5
6
7
key is
8
9
START/STOP
10
11