Hioki 3169-20 Instruction Manual page 16

8
Setting up the 3169-20/21
Avoid the follow-
• This product is designed for indoor use, and operates reliably
ing:
• Do not store or use the product where it could be exposed to
Direct High temper-
sunlight ature
High humidity
• This product is not designed to be entirely water- or dust-proof.
Dust
• Do not use the product near a device that generates a strong
Electomagnetic
radiation
Corrosive or
explosive gases
Handling this device
• To avoid damage to the product, protect it from vibration or
• Be careful to avoid dropping the clamps or otherwise subjecting
from 0°C to 40°C.
direct sunlight, high temperature or humidity, or condensation.
Under such conditions, the product may be damaged and insu-
lation may deteriorate so that it no longer meets specifications.
To avoid damage, do not use it in a wet or dusty environment.
electromagnetic field or electrostatic charge, as these may
cause erroneous measurements.
shock during transport and handling, and be especially careful to
avoid dropping.
them to mechanical shock, which could damage the mating sur-
faces of the core and adversely affect measurement.