5.3 Setting on the Data Output Setting Screen (DATA OUTPUT)
5.3.1 Setting the Time-Series Measurement Start
Method
Press the
NEXT
Press the
SCR
screen. (3169-20: SET UP 2/4, 3169-21: SET UP 2/5)
Move the cursor to "
Set the time-series measurement start method using the function
MANUAL
keys.
TIME
JUST
*
:
1
The
screen is displayed. It is not effective when the setting screen is
displayed.
key to display the setting screen.
SET UP
(NEXT SCR) key to display the data output setting
F5
MEAS. START
MANUAL Manual Measurement starts when the
pressed (default setting).
TIME
Measurement starts at the set time.*1
JUST
Measurement will begin as soon as the internal clock reaches
a time that is evenly divisible by the set interval.
Example:
If the current time is 10:41:22, and the measurement interval
is set to 30 minutes, then measurement will start at 11:00:00
(:00 minutes [or :60 minutes] is evenly divisible by 30 as
60/30 = 2 with no remainder) with the next recording at
11:30:00, 12:00:00, etc.). If the interval is set to 10 minutes,
measurement will start at 10:50:00.
The 3169-20/21 will enter into waiting status when the
pressed to start measurement. Measurement will then start at the set time.
key is effective only when the measurement
START/STOP
."
START/STOP
START/STOP
69
1
2
3
4
5
6
7
key is
8
9
10
key is
11
Need help?
Do you have a question about the 3169-20 and is the answer not in the manual?