Table of Contents
Advertisement
Error message table
Error
ADF paper load error
Cover open
Ink tank door open
Input tray removed
Control panel message
Paper Load Error
Printer Cover Open
Ink Cartridge Access Door Is
Open
Paper Tray Removed
Action
Technical Support Center:
Make sure the paper is in good condition. See
"Media guidelines" on page
correctly in the ADF input tray.
Service:
Load paper. If the problem remains, then check the
paper sensor; if the paper sensor is okay, then
check and/or replace the system board. See
"System board removal" on page
Technical Support Center:
Close the ADF/scanner assembly properly. Turn off
the printer by unplugging the power cord. Wait for
10 seconds, then turn on the printer. If the problem
remains, then replace the printer.
Service:
Go to
"Cover open service check" on page
Technical Support Center:
Inspect the ink tank door for any damage and if it is
dislodged. Close the ink tank door, and check if it
can be properly closed. Turn off the printer by
unplugging the power cord. Wait for 10 seconds,
then turn on the printer. If the problem remains,
then replace the printer.
Service:
Check the ink tank door sensor flag and spring.
Check the sensor cable for damage, and reseat the
sensor cable. See
"Ink tank door open service
check" on page
2-76.
Technical Support Center:
Remove the tray, and inspect for any damage.
Check if the tray can close properly. Turn off the
printer by unplugging the power cord. Wait for 10
seconds, then turn on the printer. If the problem
remains, then replace the input tray.
Service:
Go to
"Input tray removed service check" on
page
2-77.
Diagnostic information
Marketing Name
Previous
Next
1-27. Load paper
Go Back
4-32.
2-70.
2-40
Advertisement
Table of Contents
