Releasing The Printhead Carrier Assembly Lock (With Covers) - Lexmark Pro5500t Service Manual

4447-20x

Releasing the printhead carrier assembly lock (with covers)

The printhead carrier assembly has a lock that needs to be released, so that the assembly can move. The
instruction applies when the printer covers are still intact.
Manually turn the PRA gear clutch shaft counterclockwise by pressing on it at the bottom side of the printer to
release the carrier lock.
Note: The following shows the position of the carrier lock (A) when:
•
It is locked.
3-21
Service Manual
A
Previous
Next
Go Back