4038-001
Error message table
Clearing display messages:
Display
Bypass Jam
2-2
Service Manual
Meaning
Paper was sensed at
the manual bypass
sensor, but not at the
main paper feed/toner
cartridge present
sensor.
Solution
• Load paper in the
manual bypass or
remove the jam from
the manual bypass.
• Make sure the main
paper feed/toner
cartridge present
sensor actuator is
not broken,
improperly installed
or stuck with paper
debris.
• Perform the
"Sensor
test" on page 3-17
to check proper
operation of the
sensor.
• If the sensor works
properly, the problem
is likely associated
with the system
board.
• If the paper path and
sensor actuator are
clear and working
properly, and the
problem persists,
replace the HVPS/
LVPS.
Note: This sensor is
a component of the
HVPS/LVPS.