Lexmark Pro5500t Service Manual page 95

Error
Printhead Warning
Proxy Error
Remote Fax Error
Replace Ink Cartridge
Scanned Document Too
Long
Scanner ADF Cover Open
Scanner Disabled
Security Certificate Error
SmartSolutions Update
Failed
Standard Network Software
Error
Action
One or more cartridges may have been missing for more than two
hours since the printer was turned on. Clean or Deep Clean the
printhead to restore print quality.
Notes:
• Cleaning the printhead nozzles uses ink, so clean them only when
necessary.
• Deep cleaning uses more ink, so try the Clean Printhead option first
to save ink.
• If the ink levels are too low, then you must replace the ink cartridges
before you can clean the printhead nozzles.
• Refer to the User's Guide or visit the Lexmark Support Web Site at
http://support.lexmark.com
printhead nozzles.
Try one or more of the following:
• Touch Set Proxy to enter the proxy settings.
• Touch OK to clear the message.
The receiving fax machine cannot receive the fax. There may be errors
on the receiving end.
Try one or more of the following:
• Replace the unrecognized ink cartridge with one that is supported
by your printer.
• If a Cartridge Finder widget has been downloaded to you printer,
then touch Find Ink.
The Cartridge Finder solution available in the SmartSolutions menu
appears.
• Touch OK to clear the message.
• Refer to the User's Guide or visit the Lexmark Support Web Site at
http://support.lexmark.com
The scan job exceeds the maximum number of pages. Touch Cancel
Job to clear the message and cancel the current scan job.
Try one or more of the following:
• Close the ADF cover to clear the message.
• Press to cancel the current scan job.
Try one or more of the following:
• Check the printer software settings or the Administration settings
from the printer to enable the scanner.
• Touch OK to clear the message.
Try one or more of the following:
• Touch Set Date to check the printer date, and then try to reconnect
to the server.
• Touch OK to clear the message.
Try one or more of the following:
• Make sure your printer and computer are each connected to the
Internet through an Ethernet or wireless connection.
• Make sure your printer is securely connected to the host computer,
print server, or other network access point.
• Touch OK to clear the message.
Try one or more of the following:
• Touch Continue to clear the message.
• Turn the printer off and then back on to reset the printer.
for more information on how to clean the
for a list of supported ink cartridges.
Diagnostic information
Marketing Name
Previous
Next
Go Back
2-52