Table of Contents
Advertisement
24.
Push the toroid holder upward to release the toroid.
25.
Remove the three disconnected FFCs from the guides, and set aside.
Note: Take note of the original routing of all the cables.
26.
Remove the ink tubes from the guides by releasing the snaps (M) using a prying tool.
Note: Take note of the original routing of all the ink tubes.
Note: Be careful in handling the tubes, as ink might spill.
M
4447-20x
4-64
Repair information
Previous
Next
Go Back
Disassembly
Flow chart
Advertisement
Table of Contents
