Table of Contents
Advertisement
Language
This shows all the available languages that can be used by the printer.
To change this setting:
1.
From the Service Menu, navigate to Language.
2.
Select a language.
3.
Touch
changes.
4.
If the setting is accepted, You have chosen [Language] as the language of your printer.
Are you sure? appears. Touch Yes to save the setting, or touch No to go back to the Language menu.
Reformat Solutions Partition
This setting allows the user to delete all SmartSolutions from the printer, and disconnect it from the
SmartSolutions server.
To do this:
1.
From the Service Menu, navigate to Reformat Solutions Partition.
2.
A warning prompt appears. Touch Yes to execute the SmartSolutions partition reformat, or touch No to go
back to the Service Menu screen.
Reset Admin PIN
This setting resets the PIN to default, and turns off the settings lock.
To do this:
1.
From the Service Menu, navigate to Reset Admin PIN.
2.
The Admin PIN has been reset, and the settings lock has been turned off appears.
Network SE Menu
This menu contains settings for fine tuning the communication settings for network interfaces and protocols.
To change this setting:
1.
From the Service Menu, navigate to Network SE Menu.
2.
Select a setting.
3.
Touch
changes.
to accept the setting, or touch
to save the setting, or touch
to return to the Configuration Menu without saving any
to return to the Configuration Menu without saving any
4447-20x
Previous
Next
Go Back
3-8
Diagnostic aids
Advertisement
Table of Contents
