6.11 Computer Interface - YOKOGAWA DL850E User Manual

6.11 Computer Interface

USB-PC Connection
Item
Connector type
Electrical and mechanical
specifications
Supported transfer mode
Number of ports
Supported protocols
PC system requirements
* A separate driver is required.
Ethernet
Item
Connector type
Ports
Electrical and mechanical
specifications
Transmission system
Communication protocol
Supported services
GP-IB (/C1 or /C20 option)
Item
Connector type
Electrical specifications
Functional specifications
Protocol
Code
Mode
Address
Remote mode release
6-16
Specifications
USB type B receptacle
USB Rev. 2.0 compliant
HS (High Speed; 480 Mbps) and FS (Full Speed; 12 Mbps)
1
Functions as a device that conforms to one of the following two protocols.
USBTMC-USB488 (USB Test and Measurement Class Ver. 1.0)
GP-IB commands can be used through USB.
Mass Storage Class Ver.1.1
Only reading from a PC to the internal hard disk of the DL850E/DL850EV is possible.
(Operations, such as writing, deleting and formatting, are impossible.)
A PC with a USB port, running the English or Japanese version of Windows 7 (32 bit), Windows
Vista (32 bit), or Windows XP (32 bit, SP2 or later)
Specifications
RJ-45 modular jack
1
IEEE802.3
Ethernet (1000BASE-T, 100BASE-TX, 10BASE-T)
TCP/IP
DHCP, DNS, SNTP client, SMTP client, FTP server and client, LPR, Web server, and VXI11
Specifications
24-pin connector
Complies with IEEE St'd 488-1978 (JIS C 1901-1987)
SH1, AH1, T6, L4, SR1, RL1, PP0, DC1, DT0, and C0
IEEE St'd 488.2-1992
ISO (ASCII)
Addressable mode
Talker and listener addresses can be specified from 0 to 30.
Remote mode can be cleared with the SHIFT+CLEAR TRACE key (except during Local Lockout).
*
IM DL850E-03EN