YOKOGAWA DL850E User Manual page 11

Optional Accessories (Sold Separately)
The optional accessories below are available for purchase separately. Check that all contents are
present and undamaged.
• Use the accessories specified in this manual. Moreover, use the accessories of this product only
with Yokogawa products that specify them as accessories.
• Use the accessories of this product within the rated range of each accessory. When using several
accessories together, use them within the specification range of the accessory with the lowest
rating.
Name Model
Isolated probe 700929
701947
Current probe 701930
701931
701932
701933
10:1 passive probe 701940
702902
Differential probe 700924
700925
701926
1:1 BNC safety 701901
adapter lead
Measurement lead 758933
Alligator clip (dolphin 701954
type)
Safety mini-clip (hook 701959
type)
Alligator clip adapter 758922
Alligator clip adapter 758929
Fork terminal adapter 758921
Cable 1 366926
Banana–alligator clip 366961
cable
High-speed logic 700986
probe
Isolated logic probe 700987
1 m logic probe 702911
3 m logic probe 702912
Isolated logic 758917
measurement lead
IM DL850E-03EN
Safety standard Note
1000 Vrms CAT II 10:1 safety probe for the 701250, 701251, 720210,
720211, and 720254
1000 Vrms CAT II 100:1 safety probe for the 701250, 701251, 720210,
720211, and 720254
300 Vrms CAT III 150 Arms, DC to 10 MHz. Used by connecting to a
probe power terminal (/P4 option) or a probe power
supply (701934; sold separately).
300 Vrms CAT III 500 Arms, DC to 2 MHz. Used by connecting to a
probe power terminal (/P4 option) or a probe power
supply (701934; sold separately).
300 Vrms 30 Arms, DC to 100 MHz. Used by connecting to a
probe power terminal (/P4 option) or a probe power
supply (701934; sold separately).
300 Vrms 30 Arms, DC to 50 MHz. Used by connecting to a
probe power terminal (/P4 option) or a probe power
supply (701934; sold separately).
— For non-isolated input on the 701255: 600 V or less
For isolated input other than above: 42 V or less
1000V (DC+ACpeak) 10:1 safety probe, wide temperature range, for isolated
CAT II BNC input, for the 701250, 701251, 720210, 720211,
and 720254
1000 Vrms CAT III Switchable between 1000:1 and 100:1
Measurable voltage: 1400 Vpeak (1000 Vrms)
1000V (DC+ACpeak) Switchable between 100:1 and 10:1
CAT III Measurable voltage: 500 Vpeak (350 Vrms)
1000 Vrms CAT III Switchable between 1000:1 and 100:1
Measurable voltage: 7000 Vpeak (5000 Vrms)
1000 Vrms CAT II For use with the 701250, 701251, 720210, 720211,
and 720254. Used with the following items (which
are sold separately): the 701954, 701959, 758922,
758929, or 758921.
1000 Vrms CAT III 1 m in length; for use with the 701267. Used with
the following items (which are sold separately): the
701954, 701959, 758922, 758929, or 758921.
1000 Vrms CAT III Two pieces in one set (red/black)
1000 Vrms CAT II Two pieces in one set (red/black)
300 Vrms CAT II Two pieces in one set
1000 Vrms CAT II Two pieces in one set
1000 Vrms CAT II Two pieces in one set (red/black). For 4 mm screws.
— For measuring low voltage of less than or equal to 42
V
— For measuring low voltage of less than or equal to 42
V for the 701261, 701262, or 701265
— 42 V or less, 8 bits, non-isolated, response speed of 1
μs
250 Vrms CAT II 8 bits, each channel isolated, response speed of 20 ms
(for AC)
— 8 bits, non-isolated
— 8 bits, non-isolated
1000 Vrms CAT II Two pieces in one set. Used with the 758922 or
758929 adapter. The adapters are sold separately.
Checking the Contents of the Package
Manual No.
IM 700929-01E
IM 701947-01E
IM 701930-01E
IM 701931-01E
IM 701932-01E
IM 701933-01E
IM 701940-01E
IM 702902-01EN
IM 700924-01E
IM 700925-01E
IM 701926-01E
—
—
—
—
—
—
—
—
—
—
IM 700987-01E
—
—
—
ix