Video Signal Output (Video Out (Xga)) - YOKOGAWA DL850E User Manual

5.4

Video Signal Output (VIDEO OUT (XGA))

• Only connect the DL850E/DL850EV to a monitor after turning both the DL850E/DL850EV
and the monitor off.
• Do not short the VIDEO OUT terminal or apply external voltage to it. Doing so may damage
the DL850E/DL850EV.
French
• Ne brancher le DL850E/DL850EV sur un moniteur qu'après avoir mis hors tension le
DL850E/DL850EV et le moniteur.
• Ne pas court-circuiter la borne VIDEO OUT et ne pas appliquer de tension de sortie. Cela
pourrait endommager le DL850E/DL850EV.
Video Signal Output Terminal
VIDEO OUT
( XGA )
You can use video signal output to display the DL850E/DL850EV screen on a monitor. Any multisync
monitor that supports XGA can be connected.
Item
Connector type
Output format
Output resolution
10
15
11
6
D-Sub 15-pin receptacle
Connecting to a Monitor
1. Turn off the DL850E/DL850EV and the monitor.
2. Connect the DL850E/DL850EV and the monitor using an RGB cable.
3.
Turn on the DL850E/DL850EV and the monitor.
IM DL850E-03EN
Specifications
D-sub 15-pin
Analog RGB output
XGA output, 1024 × 768 dots, approx. 60 Hz Vsync
Pin No. Signal
1 Red
5
2 Green
3 Blue
4 —
1
5 —
6 GND
7 GND
8 GND
9 —
10 GND
11 —
12 —
13 Horizontal sync signal
14 Vertical sync signal
15 —
CAUTION
ATTENTION
Specifications
0.7 V
P-P
0.7 V
P-P
0.7 V
P-P
Approx. 36.4 kHz, TTL positive logic
Approx. 60 Hz, TTL positive logic
1
2
3
4
5
6
App
Index
5-5