6.13 Module Specifications
CAN Bus Monitor Module (720240)
Item
Standard operating
condition
Number of input ports
Maximum sample rate
Input format
Maximum input voltage
Maximum allowable
common mode voltage
Input connector
Terminator
Supported protocol
1
Supported bit rates
LED display
Number of sub channels
One shot output
Terminator resistance
(when the terminator is
enabled)
A/D converter resolution
(when Value Type is set to
Float)
1 Low-speed CAN at low-speed transceiver levels is not supported.
6-48
Specifications
Ambient temperature: 23±5°C
Ambient humidity: 20 to 80% RH
2
100 kS/s
Isolated unbalanced
–3 to +10 V (between CAN_H and GND or CAN_L and GND)
42 V (DC+ACpeak) (CAT II, 30 Vrms)
D-sub 9 pin (male)
Internal, can be enabled or disabled for each port
Physical layer: ISO-11898 (High Speed Communication)
10 kbps, 20 kbps, 33.3 kbps, 50 kbps, 62.5 kbps, 66.7 kbps, 83.3 kbps, 100 kbps, 125 kbps,
250 kbps, 500 kbps, 800 kbps, 1 Mbps
Illuminates to indicate that the terminator is enabled
60 sub channels/ports
Frames can be output in single shots
110 to 130 Ω
16 bits, 2400 LSB/div
IM DL850E-03EN