Chapter 3 Using Network Functions (Ethernet Interface); Using The Web Application To Change The Gx/Gp Settings, Monitor Data, And Control The Gx/Gp (Web Server Function); Connecting To A Network - YOKOGAWA GX20 User Manual

Chapter 3 Using Network Functions (Ethernet interface)
3.1 Using the Web Application to Change the GX/GP
Settings, Monitor Data, and Control the GX/GP
(Web server function)
3.1.1 Connecting to a Network
IM 04L51B01-01EN
Configuring the GX/GP for Network Connection
To connect the GX/GP to an Ethernet network, you need to configure the GX/GP in
accordance with the network environment. For the configuration procedure, see page 1-180
in section 1.21, "Configuring the Ethernet Communication Function"
Connecting an Ethernet Cable
Do not connect an Ethernet cable whose plug does not comply with FCC specifications.
Doing so may damage the GX/GP.
Connect an Ethernet cable from your network to the Ethernet port on the GX/GP rear panel.
The figure below shows the position of the Ethernet port on the GX20.
Ethernet port
1
2
3
4
5
App
Index
3-1