Remote Interface - YOKOGAWA AQ7277 User Manual

Chapter 1 Remote Control Function Overview
1.1

Remote Interface

USB 1.1 Interface (Type B. See Chapter 2)
Ethernet Interface (See Chapter 2)
Downloading the Library and Driver
IM AQ7277-17EN
The AQ7277 is equipped with the following remote interfaces.
This interface is used by a controller such as a PC to remotely control the AQ7277.
A controller is connected to this interface.
Remote commands are used to control the AQ7277.
Dedicated commands for the AQ7277 complying with SCPI (Standard Commands for
Programmable Instruments) are available for the remote commands (see chapter 4).
This interface is used by a controller such as a PC to remotely control the AQ7277 via
the network.
The items below are needed on the PC to use the communication functions via the USB
interface.
• Communication Library(TMCTL)
• USB connection device driver between the PC and AQ7277(YKUSB)
The items below are needed on the PC to use the communication functions via the
Ethernet interface.
• Communication Library(TMCTL)
The library and driver above can be downloaded from the following Web page.
http://www.yokogawa.com/tm/dl_driver.htm
1
2
3
4
5
App
Index
1-1