Can & Lin Bus Monitor Module (720241) - YOKOGAWA DL850E User Manual

CAN & LIN Bus Monitor Module (720241)
Item
Standard operating
condition
Number of input ports
Maximum sample rate
Input format
CAN port
Item
Maximum input voltage
Maximum allowable
common mode voltage
Input connector
Terminator
Terminator resistance
(when the terminator is
enabled)
LED display
Supported protocol
Supported bit rates 1
Supported data length
Number of sub channels
One shot output
A/D converter resolution
(when Value Type is set to
Float)
1 Low-speed CAN at low-speed transceiver levels is not supported.
LIN port
Item
Maximum input voltage
Maximum allowable
common mode voltage
Input connector
Supported protocol
Supported bit rates
Supported data length
Number of sub channels
Supported check sums
IM DL850E-03EN
Specifications
Ambient temperature: 23±5°C
Ambient humidity: 20 to 80% RH
CAN port: 1. LIN port: 1.
100 kS/s
Isolated unbalanced
Specifications
–3 to +10 V (between CAN_H and GND or CAN_L and GND)
42 V (DC+ACpeak) (CAT II, 30 Vrms)
D-sub 9 pin (male)
Internal, can be enabled or disabled
110 to 130 Ω
Illuminates to indicate that the terminator is enabled
Physical layer: ISO-11898 (High Speed Communication)
10 kbps, 20 kbps, 33.3 kbps, 50 kbps, 62.5 kbps, 66.7 kbps, 83.3 kbps, 100 kbps, 125 kbps,
250 kbps, 500 kbps, 800 kbps, 1 Mbps
4 bytes maximum
60 sub channels
Frames can be output in single shots
16 bits, 2400 LSB/div
Specifications
–0.3 to +18 V (between LIN.VBAT and GND)
30 Vrms (CAT I and II)
D-sub 9 pin (male)
Physical layer: Complies with ISO9141
2400 bps, 9600 bps, 19200 bps
4 bytes maximum
60 sub channels
Standard check sum, extended check sum
6.13 Module Specifications
6-49
1
2
3
4
5
6
App
Index