Eoi Features - Toshiba H9 ASD Installation And Operation Manual

EOI Features

Figure 21. The H9 ASD Electronic Operator Interface Features.
LED Screen
Rotary Encoder
parameter, and performs the Enter key function. Turn the Rotary Encoder either clockwise or
counterclockwise to perform the Up or Down functions of the displayed menu selection. Press the Rotary
Encoder to perform the Enter (select) function. Press while turning for times-ten increment/decrement.
LCD Screen
voltage, torque, etc.), diagnostic information, and LED screen information in expanded normal text.
Local/Remote Key
Remote key is disabled while the Fault screen is active. The Local/Remote key LED is on when the
system is in the Local mode. The Local mode allows the Command and Frequency control functions to
be carried out via the EOI.
The Remote mode enables the Command and Frequency control functions to be carried out via the
Terminal Board, RS485, Communication Board, Pulse Input, or the settings of F003/F004. The (F003/
selection may be made via Program  Fundamental  Standard Mode Selection 
F004)
Mode and
The availability of Local mode control (Command and Frequency control) may be disabled via Program
 Utilities  Prohibition 
Override. The availability of the Local mode of operation may be reinstated by changing this setting or
performing a Reset (see F007).
ESC Key
Command screen and the Frequency Command screen, or cancels changes made to a field if pressed
while still in the reverse video mode (dark background/light text). The three functions are menu-specific.
Run Key
while stopped or red while running to alert personnel.
Mode Key
the system through the three root menus (see
the Program menu will display the root menu screen or the Program sub-menu item being accessed prior
to pressing the Mode key.
30
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.ctiautomation.net - Email: info@ctiautomation.net
— Displays the running frequency, active Fault, or active Alarm information.
— Used to access the H9 ASD menu selections, change the value of a displayed
— Displays configuration information, performance data (e.g., output frequency, bus
— Toggles the system to and from the Local and Remote modes. The Local/
Frequency Mode 1, respectively.
Local/Remote Key Command Override
— Returns the system to the previous level of the menu tree, toggles between the EOI
— Issues the Run command while in the Local mode. The Run key LED illuminates green
— Provides a means to access the three root menus. Pressing the Mode key repeatedly loops
and
Figure 27 on pg. 41). While looping through the root menus,
H9 ASD Installation and Operation Manual
LED Screen
Rotary Encoder
LCD Screen
Local/Remote
Key (LED)
Escape Key
Run Key
(LED)
Mode
Key
Stop-Reset Key
Command
Local/Remote Key Frequency