Trace Cycle; Trace Data - Toshiba H9 ASD Installation And Operation Manual

F741

Trace Cycle

Program Utilities Trace
This parameter sets the record time for the Trace Data events selected at
– F745.
See F740 for more information on this parameter setting.
Settings:
0 — 4 mS
1 — 20 mS
2 — 100 mS
3 — 1 Second
4 — 10 Seconds

Trace Data 1

Program Utilities Trace
This parameter is used to select the Trace Data 1 item from
to be read and stored in accordance with the setup of parameters
F741.
See F740 for more information on this parameter setting.
Trace Data 2
Program Utilities Trace
This parameter is used to select the Trace Data 2 item from
to be read and stored in accordance with the setup of parameters
F741.
See F740 for more information on this parameter setting.
Trace Data 3
Program Utilities Trace
This parameter is used to select the Trace Data 3 item from
to be read and stored in accordance with the setup of parameters
F741.
See F740 for more information on this parameter setting.
Trace Data 4
Program Utilities Trace
This parameter is used to select the Trace Data 4 item from
to be read and stored in accordance with the setup of parameters
F741.
See F740 for more information on this parameter setting.
H9 ASD Installation and Operation Manual
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.ctiautomation.net - Email: info@ctiautomation.net
Direct Access Number — F741
Parameter Type — Selection List
Factory Default — 100 mS
F742
Changeable During Run — Yes
Direct Access Number — F742
Parameter Type — Selection List
Factory Default — Output Frequency
Table 9 on pg. 240
F740 and
Changeable During Run — Yes
Direct Access Number — F743
Parameter Type — Selection List
Factory Default — Freq. Reference
Table 9 on pg. 240
F740 and
Changeable During Run — Yes
Direct Access Number — F744
Parameter Type — Selection List
Factory Default — Output Current
Table 9 on pg. 240
F740 and
Changeable During Run — Yes
Direct Access Number — F745
Parameter Type — Selection List
Factory Default — DC Voltage
Table 9 on pg. 240
F740 and
Changeable During Run — Yes
F745
201