Toshiba H9 ASD Installation And Operation Manual page 180

F524
Pattern Group 1 Selection 2
Program Pattern Run Speeds
This parameter allows the user to select 1 of 15 configured Preset Speeds as
the number 2 Selection to be included in Pattern Group 1.
Skip may be selected to ignore this Selection.
Setting
0 — Skip
1 – 15 Preset Speed Number
See F523 for more information on this parameter.
Pattern Group 1 Selection 3
Program Pattern Run Speeds
This parameter allows the user to select 1 of 15 configured Preset Speeds as
the number 3 Selection to be included in Pattern Group 1.
Skip may be selected to ignore this Selection.
Setting
0 — Skip
1 – 15 Preset Speed Number
See F523 for more information on this parameter.
Pattern Group 1 Selection 4
Program Pattern Run Speeds
This parameter allows the user to select 1 of 15 configured Preset Speeds as
the number 4 Selection to be included in Pattern Group 1.
Skip may be selected to ignore this Selection.
Setting
0 — Skip
1 – 15 Preset Speed Number
See F523 for more information on this parameter.
Pattern Group 1 Selection 5
Program Pattern Run Speeds
This parameter allows the user to select 1 of 15 configured Preset Speeds as
the number 5 Selection to be included in Pattern Group 1.
Skip may be selected to ignore this Selection.
Setting
0 — Skip
1 – 15 Preset Speed Number
See F523 for more information on this parameter.
H9 ASD Installation and Operation Manual
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.ctiautomation.net - Email: info@ctiautomation.net
Direct Access Number — F524
Parameter Type — Selection List
Factory Default — Skip
Changeable During Run — No
Direct Access Number — F525
Parameter Type — Selection List
Factory Default — Skip
Changeable During Run — No
Direct Access Number — F526
Parameter Type — Selection List
Factory Default — Skip
Changeable During Run — No
Direct Access Number — F527
Parameter Type — Selection List
Factory Default — Skip
Changeable During Run — No
F527
173