H9 ASD Optional Devices
The ASD may be equipped with several options which are used to expand the functionality.
lists the available options and their functions.
Part Identifier
ASD-CAB-USB
ASD-EOI-HH-G9
ASD-MTG-KIT9
ASD-TB1-SIM9
DEV002Z
ETB003Z
ETB004Z
PDP002Z
USB001Z
VEC007Z
VEC004Z
VEC005Z
VEC006Z
Note:
See the user manual of the applicable option for further information on each item.
H9 ASD Installation and Operation Manual
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.ctiautomation.net - Email: info@ctiautomation.net
Table 23. H9 Optional Devices and Functions.
Device Name
H9 USB Communication Cable
Display Module Docking Station
9-Series EOI Remote Mounting Kit
ASD Input/Output Signal Simulator
DeviceNet Module
Expansion I/O Board 1
Expansion I/O Board 2
ProfiBus DP Module
USB-to-Serial Converter
PG Vector Feedback Board
PG Vector Feedback Board
PG Vector Feedback Board
PG Vector Feedback Board
Device Function
Used to connect the ASD to a PC via the USB port of the
PC.
Used to flash the 9-series display module.
Hardware used to mount 9-series ASD EOI remotely.
Used to simulate the ASD I/O monitor and control signals.
Allows the ASD to communicate via DeviceNet with
other DeviceNet-supported equipment including a host
computer.
Expands the Input/Output functionality of the ASD.
Expands the Input/Output functionality of the ASD.
Allows the ASD to communicate via ProfiBus with other
ProfiBus-supported equipment including a host computer.
Allows for the USB port of a computer to be used as a
communications port for monitoring and controlling the
ASD.
Allows for the use of Vector Control using a sensor (for
use with a 5-volt encoder).
Allows for the use of Vector Control using a sensor (for
use with a 12-volt encoder).
Allows for the use of Vector Control using a sensor (for
use with a 15-volt encoder).
Allows for the use of Vector Control using a sensor (for
use with a 24-volt encoder).
Table 23
269