Processing [Standard] Mail; Processing [Normal] Mail; How To Apply Standard Postage (Settings) - Neopost IS-240 User Manual

Processing [Standard] Mail

3.3

Processing [Normal] Mail

This section describes the parameter settings and mail handling sequences for the
mail processes that use the [Normal] type of imprint, to apply postage using different
rates.
About the 'Types of imprint', see also
Applying Standard Postage
Sequence of Settings
The procedure below outlines steps to process mail.
As mail requirements differ from day to day, some of the settings may not be nec-
essary, or their order may vary.

How to Apply Standard Postage (Settings)

How to Apply
Standard
Postage
(Settings)
The different Types of Imprint
At this point, make sure you have completed the preparation
Preparing and Starting your Work Session
steps mentioned in
p.29 .
Required settings:
1
Make sure you are on the Home Screen of the Normal type
of imprint .
The Home Screen indicates weight, postage and currently
selected rate as illustrated below.
2
To change the type of imprint (if you are not in Normal mode)
.
Press and type
The type of imprint is indicated on the 2nd line of the screen.
p.27 .
Imprint
1 to access the
3
screen.
35