Time And Date Management; How To Check The Machine Time And Date - Neopost IS-240 User Manual

Time and Date Management

9.11 Time and Date Management

Daylight Savings Time Transitions
The mailing system normally auto-adjusts to Daylight Savings Time . However, if a
manual adjustment is necessary, you can use either of the following procedures to
correct the mailing system time:
As User:
•
As Supervisor:
•
Time and Date Checking
The time and date are required for postage and are provided by the postal au-
thorities. As a result, you cannot manually adjust the machine time and date.
However, you can ask the machine to check the current time and date and display
them.
See also
9 Automatic Date Advance
•

How to Check the Machine Time and Date

How to Check
the Machine
Time and Date
148
How to Unlock the Meter
How to Check the Machine Time and Date
p.139 .
To check the time and date, make sure the connection to the
Postal Services is available. See
Services Connection
To check the current time and date as Supervisor (See
Log in as Supervisor
1
Either:
Press
Or
Select the path: > Machine settings > Date and time
2
Select Audit call to adjust the time.
The machine adjusts its time if necessary and displays time
and date values.
If the clock adjusts backwards for 'Daylight savings time', the
mailing system will wait until last postage printing time before
allowing you to process new mail.
p.67
How to Select a Postal/Online
p.143 .
p.124 ):
and type 6.3
p.148 below.
How to