Postage Imprint Default Settings; How To Change The Default Rate; How To Change The Default Ppi - Neopost IS-480 User Manual

Postage Imprint Default Settings

8.9

Postage Imprint Default Settings

The settings of the postage imprint 'by default' include:
Stamp default settings: sets the default rate, text and ad die for mailing operations
•
Automatic Date Advance: enables early date change to continue printing postage
•
with the new date after post office closing hours
Printing offset: sets the default offset print position from the right side of the en-
•
velope.
Stamp Default Settings
You can set default parameters for the stamp elements that follow:
Rate
•
Prepaid imprint (PPI)
•
Text
•
Ad Die
•
You can create up to nine custom text messages.
On list screens, a mark
Changing the Default Rate
Use the procedure below to change the rate the machine activates at start-up.

How to Change the Default Rate

How to Change
the Default Rate
See also
Managing Postal Rates
•
Default Pre-Paid Imprint (if available)
The default PPI is automatically selected when the [PPI] type of stamp is activated.

How to Change the Default PPI

How to Change
the Default PPI
indicates the default parameter.
To change the default rate:
1
As supervisor (see
Press
> Default user settings > Default imprint parameters >
Default rate
2
Select the default rate using the rate wizard.
3
Press [OK] to validate.
p.202
To change the default rate:
1
As supervisor (see
How to Log in as Supervisor
and type 3.3.3 or select the path:
How to Log in as Supervisor
8
p.164):
p.164):
179