Table of Contents
Advertisement
Copy model model
Select the "Copy model model" sub-menu with the
selection keys of the left or right touch pad then
tap the
SET
key.
Erase model
Copy modelodell –> Modell
Please select
Expor t to SD-Kar te
RF on/off?
=>
Impor t fromn von SD-Kar te
Copy flight en kopieren
ON
OFF
If the message shown above should appear, the
transmitter's RF module is still active.
ESC
By pressing the central
button of the left or the
SET
centre
key of the right touch pad to cancel the
operation.
Choose contrast with the button left or right touch
pad to "OFF" and confirm your choice with a brief tap
SET
on the
key, the process continues. Safety, turn
off but before a possibly in operation receiving sys-
tem.
Choose the model to be copied with the selection
keys of the left or right touch pad ...
Copy from model:
01
Graubele
1234g/080811
02
Ultimate
Test
03
Starlet
trim needed
04
BELL47G
05
free
... then, following the change into the "Copy to model"
window caused by another tap on the
right touch pad, the destination memory can be se-
lected with the selection keys of the left or right
touch pad.
Yet another tap on the
copy process or a tap on
to be cancelled. A memory location which is already
occupied can be overwritten.
Copy
01
Graubele
02
Ultimate
03
Starlet
04
BELL47G
05
free
After confirming the selected model memory with a
tap on the
SET
pear:
Model really
02
Ultimate
to be copied?
A
NO
response will cancel the process and return
the screen to the originating screen. If the YES
response is selected and confirmed with a tap on the
SET
key then the selected source model will be cop-
01:23hR16
ied into the selected model memory destination.
00:44hR12
00:33hR08
Note:
In addition to model data, binding data is also
00:22hR08
copied by this process. This means that a
receiver system which was/is bound to the
original model memory can also be operated by its
copy in the SAME transmitter without establishing the
SET
key of the
binding again.
SET
key will then confirm the
ESC
key will cause the copy
to model:
1234g/080811
01:23hR16
Test
00:44hR12
trim needed
00:33hR08
00:22hR08
key, a confirmation request will ap-
05
free
NO
YES
Exporting to SD card
Use the selection keys of the left or right touch
pad to select the "Export to SD" sub-menu then tap
SET
on the
key.
Erase model
Copy modeModell –> Modell
Please select
Expor t to SDach SD-Kar te
RF on/off?
=>
Impor t from von SD-Kar te
Copy flight sen kopieren
ON
OFF
If the message shown above should appear, the trans-
mitter's RF module is still active.
By pressing the central
ESC
button of the left or the
centre
SET
key of the right touch pad to cancel the
operation.
Choose contrast with the button left or right touch
pad to "OFF" and confirm your choice with a brief tap
on the
SET
key, the process continues. Safety, turn
off but before a possibly in operation receiving sys-
tem.
Choose the model to be exported with the selec-
tion keys of the left or right touch pad ...
expor t to SD-Card:
01
Graubele
1234g/080811
02
Ultimate
Test
03
Starlet
trim needed
04
BELL47G
05
free
After confirming the selected model memory with a tap
SET
on the
key, a confirmation request will appear:
Program description - Copy / Erase
01:23hR16
00:44hR12
00:33hR08
00:22hR08
75
Advertisement
Table of Contents
