Table of Contents
Advertisement
I5
GL fr
---
0%
+100%
I6
GL
fr
Move desired switch
---
0%
+100%
I7
GL
fr
to ON position
---
0%
+100%
I8
GL
fr
(ext. switch: ENTER)
---
0%
+100%
Normal
TYP SEL
Offset
– travel +
Actuate the desired toggle switch from its "OFF" to its
"ON" position or, for a 3-way switch, beginning from
its middle position, assign a switch direction – prefer-
ably the "second" direction. This means, if a function
is to be switched on by moving the switch forward two
positions, i. e. away from the pilot, then begin from the
switch's middle position and move the switch away
from the pilot.
The display will then present the switch number to-
gether with a symbol indicating the given switch direc-
tion. At the same time, the column label in the footer
line will change from SEL into another switch symbol.
I5
GL ---
7
0%
+100%
I6
GL
fr
---
0%
+100%
I7
GL
fr
---
0%
+100%
I8
GL
fr
---
0%
+100%
Normal
TYP
Offset
– travel +
Now put the 3-way switch back into its middle posi-
tion. Move the marker frame as necessary to the left
into the column labeled with the new switch symbol,
briefly tap on the centre
SET
key of the right touch pad
then assign the switch's other switch direction by once
again starting from the middle position but this time
move the switch in the other direction.
The display will now present the given switch number
together with a symbol indicating the given switch
direction.
120 Program description - Control adjust | Winged models
+100%
0.0 0.0
I5
GL
8
+100%
0.0 0.0
I6
GL
fr
+100%
0.0 0.0
I7
GL
fr
+100%
0.0 0.0
I8
GL
fr
Normal
–time+
TYP
Tips:
•
When assigning switches, pay attention to
the desired switching direction and also
that all unused inputs remain "free" or are
again reset to "free". This is necessary to ensure
that inadvertent actuations of these unused
controls cannot cause malfunctions.
•
The travel setting described below allows the
appropriate end state to be established for an
assigned switch.
Erasing a transmitter control or switch
assignment
+100%
0.0 0.0
A simultaneous tap on the or keys of the
+100%
0.0 0.0
right touch pad (CLEAR) while on an input line
with an active transmitter control or switch assign-
+100%
0.0 0.0
ment – see above figures – will reset the given input
+100%
0.0 0.0
back to "fr" and "---".
Column 4, "Offset"
–time+
The control centre for the given control, i. e. its zero
point, can be changed in this column. The adjustment
range lies between -125 % and +125 %.
I5
GL
8
I6
GL
fr
I7
GL
fr
I8
GL
fr
Normal
TYP
7
0%
+100%
+100%
0.0 0.0
---
0%
+100%
+100%
0.0 0.0
---
0%
+100%
+100%
0.0 0.0
---
0%
+100%
+100%
0.0 0.0
Offset
– travel +
–time+
7
0%
+100%
+100%
0.0 0.0
---
0%
+100%
+100%
0.0 0.0
---
0%
+100%
+100%
0.0 0.0
---
0%
+100%
+100%
0.0 0.0
Offset
– travel +
–time+
A simultaneous tap on the or keys of the
right touch pad (CLEAR) will reset the entry field
value displayed in inverse video back to "0 %".
Column 5, "– travel +"
This column is used to set servo travel symmetrically
or asymmetrically for each side. The setting range is
±125 % of normal servo travel.
Select an input, 5 through 16, with the selection
keys of the left or right touch pad.
To set symmetric travel, i. e. control-side independent
travel, the respective operating element (transmitter
control or switch) is to be put into a position in which
the travel setting will be covered on both sides by the
marker frame.
E5
GL
8
7
0%
+100%
E6
GL
fr
---
0%
+100%
E7
GL
fr
---
0%
+100%
E8
GL
fr
---
0%
+100%
Nor mal
Typ
Offset
– Weg +
To set asymmetric travel, the respective operating
element (transmitter control or switch) is to be moved
to the side to be set such that the marker frame only
includes the value to be changed.
I5
GL
8
7
0%
+100%
I6
GL
fr
---
0%
+100%
I7
GL
fr
---
0%
+100%
I8
GL
fr
---
0%
+100%
Nor mal
TYP
Offset
– travel +
The value setting is activated by briefly touching the
SET
centre
key of the right touch pad. The value
field/s will be displayed in inverse video. Values can be
+100%
0.0 0.0
+100%
0.0 0.0
+100%
0.0 0.0
+100%
0.0 0.0
–Zeit+
+100%
0.0 0.0
+100%
0.0 0.0
+100%
0.0 0.0
+100%
0.0 0.0
–time+
Advertisement
Table of Contents
