Table of Contents
Advertisement
voice messages. This involves selection from among
a total of three variants, whereby the variants two and
three offers option for individually regulating the vol-
ume even after leaving this menu.
Pre-setting a value
Use the selection keys on the left or right touch pad
to move the marker frame to the desired value field in
the column above the left SEL at the display's lower
SET
edge then briefly tap the centre
touch pad. The desired volume for the selected group
can be specified in increments between 0 and 10
in the value field now displayed in inverse video by
using the selection keys of the left or right touch pad.
Another tap on the centre
SET
key of the right touch
pad or the
ESC
key of the left touch pad will conclude
the process.
Following a simultaneous tap on the or keys
of the right touch pad (CLEAR), the display will return
to its "7" default value.
via rotary control
Use the selection keys on the left or right touch pad
to move the marker frame to the desired value field in
the column above the right SEL label at the display's
lower edge then briefly tap the centre
right touch pad. The message shown below will then
appear in the display:
G EN ERAL BA SIC SET T IN G S
Voive volume
Move desired
H-J Sandbrunner
Vario volu
control adj.
Touch-beeps vol.
Owners name
SEL
Now turn the desired rotary control, for example, the
right retractable knob Tv2. Afterward, this knob can
be used anytime to incrementally regulate volume
for the selected group between 0 and 10. Following a
276 Program description - Basic settings
simultaneous tap on the or keys of the right
touch pad (CLEAR), the display will return to its "fr"
default value.
via three position switch
Use the selection keys on the left or right touch pad
to move the marker frame to the column above the
switch symbol at the display's lower edge then briefly
tap the centre
key of the right
message shown below will then appear in the display:
G E N E R A L B A S I C SE T T IN G S
Voice volume Sprache
Vario volumetöne
Touch-beeps
Owners name
Now, assign a switch as described on page 60 in the
section "Assigning transmitter controls, switches and
control switches". Ideally a self-neutralizing three po-
sition switch, e. g. like that offered by Graupner under
No. 33001.5. Afterward, this switch can be used any-
time to incrementally regulate volume for the selected
group between 0 and 10.
SET
key of the
Following a simultaneous tap on the or keys
of the right touch pad (CLEAR), the display will return
to its "---" default value.
Owner
7
fr –––
7
fr –––
G E N E R A L B A S I C SE T T IN G S
7
fr –––
Voice volume
Vario volume
SEL
Touch-beeps vol.
Owners name
Up to 15 characters can be used to specify the own-
SET
key of the right touch pad. The
H-J Sandbrunner
7
fr –––
Move desired switch
to ON position
7
fr –––
(ext. switch: ENTER)
7
fr –––
SEL
SEL
H-J Sandbrunner
7
fr –––
7
fr –––
7
fr –––
SEL
SEL
er's name. Change to the next screen page () with
SET
a brief tap on the centre
key of the right touch
pad:
!"#$%&'()
+,–./0123456789:;
@ACDEFGHIJKLMNOPQRSTUVWXYZ[¥]^_
`abcdefghijklmnopqrstuvwxyz{|}~
¢ÇüéâäàåçêëèïîìÄÅÉæÆôöòûùÖÜ
Owners name
H-J
Select the desired characters with the selection keys
of the left touch pad. With a brief tap on the selec-
tion key of the right touch pad or its centre
move to the next position in which a character can be
selected. A simultaneous tap on the or keys
of the right touch pad (CLEAR) will place a space
character at the current position.
Positioning to any character position within the en-
try field can be done with the keys of the right
touch pad.
ESC
A brief tap on the centre
key of the left touch
pad will cause a return to the previous menu page.
Pre-set stick mode
As a basic principle, there are four different ways to
assign the four control functions, aileron, elevator,
rudder and throttle or brake flaps for winged models
as well as rolling, pitching, tail rotor and throttle/pitch
for helicopter models to the two sticks. Just which of
these options is chosen depends on the individual
preferences of the individual model pilot. Following a
simultaneous tap on the or keys of the right
touch pad (CLEAR), the display will return to stick
mode "1".
?
Sandb
SET
key,
Advertisement
Table of Contents
