Table of Contents
Advertisement
Tap on the or selection keys of the right
touch pad at the same time (CLEAR) to reset the
value of the field displayed in inverse video back to
"OFF".
Note:
Regardless of a switch's ON/OFF setting (see
further below), the reset of a value field in the
"Trim" line has the effect an immediate return
of the affected trim function to its original reference
point.
Contr(ol)
P R O
T R I M
AI
AI
Trim
act
act
Contr
free
free
on/off
–––
SET
SET
The second line of this menu is for selecting transmit-
ter control assignments which appear advantageous
from the many controls available on the transmitter.
To assign a transmitter control, use the selection keys
to navigate to the desired column then tap briefly on
SET
the centre
key of the right touch pad ...:
P R O
T R I M
AI
QR
Move desired
control adj.
Trim
actN
AUS
Contr
Lever1
free
on/off
–––
SET
SET
... and move the desired transmitter control:
Trim
Contr
on/off
The mid-point position of enabled proportional con-
trols corresponds to the programmed flap setting.
The trim range for a given transmitter control is about
±25 %. However, these "trim" controls are only effec-
tive when, as described in section "ON/OFF" further
below, has been assigned a profi-trim switch and
FL
FL
switched on.
off
off
An active transmitter control assignment can be
erased with a simultaneous tap on the or
free
free
selection keys of the right touch pad (CLEAR).
SET
SET
Note:
Trim values retain their settings until the next
closure of the ON/OFF switch, even then
when the trim functions in the "Control" line
have been temporally reset to "free".
ON/OFF
The "ON/OFF" line is used to assign a switch which
permits the profi-trim function to be switched on/off
globally. This assignment is done in the manner de-
WK
FL
scribed in the section "Assigning transmitter controls,
switches and control switches" on page 60. Another
AUS
off
option is to select an "FX" switch from the range of
free
free
expanded switches, if you wish the "Profi-Trim" option
to remain switched on permanently.
SET
SET
P R O
T R I M
AI
AI
FL
FL
act
act
off
off
Tvr1
Tvr2
free
free
–––
SET
SET
SET
SET
In this context, pay attention to the following
dependencies:
•
Only when the ON/OFF switch in the "Trim" line is
set to "ON" will the trim functions assigned to trim
controls in the "Contr" line be able to affect trim
within a range of ±25 %.
•
As soon as the ON/OFF switch is opened or
erased, the current trim positions will be stored
and the selected trim controls become ineffective.
A tap, at the same time, on the or selection
keys of the right touch pad (CLEAR) when a switch
assignment is active will reset a field's value back to
"---":
P R O
T R I M
AI
AI
Trim
act
act
Contr
Tvr1
Tvr2
on/off
–––
SET
SET
Program description - Profi trim | Winged models
FL
FL
off
off
free
free
SET
SET
237
Advertisement
Table of Contents
