Table of Contents
Advertisement
AiI-tr.
Note:
(suppressed by "2AIL 1FL")
Al
+100%
Ail-tr
+100%
Diff.
0%
0%
0%
Fl.pos
+100%
0%
+100%
FL
0%
0%
0%
FLAP
Normal
AILE
In this line, you specify the percentage rate with
which aileron trim is to affect "AILE", "FLAP" and – if
present – "AILE2" and/or "FLAP2".
The available range of values is -150 % to +150 %,
relative to the adjustment range of the trim wheel.
A simultaneous tap on the or keys of the right
touch pad (CLEAR) will reset the given active (inverse
video) field to its default value shown in the figure.
Diff.
(differential for aileron function)
Note:
(With "2AIL 1FL", at one level higher in the
»Wing mixers« menu, see figure on the
previous double page.)
Al
+100%
Ail-tr
+100%
Diff.
0%
Fl.pos
+100%
0%
+100%
FL
0%
0%
0%
FLAP
Normal
AILE
(aileron trim)
On this line, you set the aileron differential, plus the
differential for the FLAP and FLAP2 wing flaps – if the
latter are being activated as ailerons.
AI
0%
0%
0%
0%
0%
0%
0%
+100%
0%
0%
+100%
+100%
FL2
If you are unsure about the meaning of differ-
ential travel, please read the appropriate
explanation at the start of this section on
page 174.
The setting range of -100 % to +100 % permits correct
differentiation direction adjustment regardless of the
direction of rotation of aileron and flap servos.
A simultaneous tap on the or keys of the
right touch pad (CLEAR) will reset the given active
(inverse video) field to its default value shown in
the figure.
Fl.pos
0%
0%
0%
0%
Al
0%
0%
Ail-tr
0%
+100%
0%
Diff.
0%
+100%
+100%
Fl.pos
FL2
FL
Normal
FL
FL2
AI
FL
FL2
0% (normal)
50% (differential)
100% (split)
(flap position)
+100%
0%
0%
+100%
0%
0%
+100%
0%
+100%
0%
+100%
0%
0%
0%
0%
+100%
+100%
AILE
FLAP
FL2
Here, you set the flight phase-specific wing flap posi-
tions for all of the flaps present on the model in ques-
tion. In this way, you can specify the flap positions
that apply to each flight phase.
The adjustment range of -100 % to +100 % makes it
possible to set the correct direction of travel regard-
less of the direction of rotation of the aileron and flap
servos.
A simultaneous tap on the or keys of the
right touch pad (CLEAR) will reset the given active
(inverse video) field to its default value shown in the
figures.
The values shown in the line "FL.pos" access
to the same record about how to comparable
point in the column "AI", "AI2", "FL"
and possibly "FL2" menu "phase trim" (page
156) displayed, which is why changes always have a
direct effect mutually.
FL
This line specifies the percentage of effect produced
on aileron and flaps by the settings (if applicable, also
flight-phase dependent settings) made for Input 6 in
the »Control adjust« menu, page 108.
Al
+100%
Ail-tr
+100%
Diff.
0%
Fl.pos
+100%
0%
FL
0%
0%
0%
Normal
AILE
0%
0%
0%
Program description - Wing mixers
(effect of flap control)
0%
0%
0%
0%
0%
0%
+100%
0%
+100%
0%
0%
+100%
0%
+100%
FLAP
FL2
183
Advertisement
Table of Contents
