GRAUPNER MC-32 Manual page 134

»Control switch« menu, see page 146, and a logical
switch must have been appropriately defined in the
»Logical switch« menu, see page 150.
Whichever switch has been assigned ... the respec-
tive switch appears on the display together with a
switch icon that indicates the switch's respective
direction when moved.
Aileron 100% 3 0%
Elevator ––– 100% ––– 0%
Rudder ––– 100% ––– 0%
DUAL EXPO
Normal
SEL SEL
Select the right-hand column at the lower edge of the
display marked with SEL and activate the value field
SET
with a brief tap on the centre key of the right
touch pad, the selection keys on the left or right touch
pad can now be used to alter the Expo value shown
in the highlighted field, separately for each of the two
switch positions.
Now, for example, there is an opportunity to fly with
a linear curve characteristic with the switch in one
direction, and to preset a value other than 0 % for the
other switch direction:
Aileron 100% 3 +50%
100%
Elevator ––– ––– 0%
Rudder ––– 100% ––– 0%
DUAL EXPO
Normal
SEL SEL
At the same time, the Expo curve will be presented in
the graph.
134 Program description - Dual Rate / Expo | Winged models
A simultaneous tap on the  or  keys of the
right touch pad (CLEAR) will reset a changed entry
field value displayed in inverse video back to "0 %".
Some examples of Expo values:
Expo = +100% Expo = +50%
Stick deflection Stick deflection
In each of these examples, the Dual Rate value
equals 100 %.
Combining Dual Rate and Expo
If values have been entered for both the Dual Rate
and the Expo function, the effects of both functions
will overlap, for example, as follows:
Expo = +100%, DR = 50%
Expo = +100%, DR = 125%
Stick deflection Stick deflection
Asymmetric setting of Dual Rate and Expo
To make an asymmetric setting, i. e. a Dual Rate
or Expo setting dependent on the direction of the
respective stick, first access the »Control switch«
menu and assign one of the C1 ... C8 control switch-
es – "C3", for example – to the desired transmitter
control, e. g. control 3 for the elevator function.
Do not change the switching point for the stick's
neutral position (0 %). Now return to the "Dual Rate
/ Expo" menu and select the corresponding control
function ("Elevator" in this example).
Now, with a brief tap on the centre
Expo = –100%
right touch pad, activate the switch assignment and
change to the expanded switches then use the selec-
tion keys to move on to the previously defined "C3"
control switch.
Aileron –––
Elevator –––
Moewünschten Schalter
Stick deflection
Rudder –t–
toe die EIN Position
(erw. Schalter: SET) DUAL
Normal
A brief tap on the centre
pad will confirm the assignment of this switch.
Expo = –100%, DR = 50%
Aileron –––
Elevator G3
Rudder –––
DUAL
Normal
Stick deflection
Now use one of the selection keys to move into the
right column then move the elevator stick into its
appropriate end-point to enter a separate Dual Rate
value for each direction, e. g. for "Up elevator" ...
SET
key of the
100% ––– 0%
100% ––– 0%
Control/Logic/fix switch
100% ––– 0%
C1 C2 C3 C4 C5 C6
C7 C8 EXPO FX FXi L1 L2
SEL SEL
SET
key of the right touch
100%
––– 0%
100% ––– 0%
100% ––– 0%
EXPO
SEL SEL