GRAUPNER MC-32 Manual page 125

Column "offset"
The control centre for the given control, i. e. its zero
point, can be changed in this column. The adjustment
range lies between -125 % and +125 %.
I5 GL 8 7 0% +100%
Thr6 GL fr --- 0% +100%
Gyr7 GL fr --- 0% +100%
I8 GL fr --- 0% +100%
Normal
TYP – travel +
Offset
A simultaneous tap on the  or  keys of the
right touch pad (CLEAR) will reset the entry field
value displayed in inverse video back to "0 %".
Column "–travel+"
This column is used to set servo travel symmetrically
or asymmetrically for each side. The setting range is
±125 % of normal servo travel.
Use the  selection keys of the left or right touch
pad to select an input: I5, Thr6, Gyr7, I8 ... 15 or Tl16.
To set symmetric travel, i. e. control-side independent,
put the respective operating element (proportional
control or switch) into a position where the marker
frame encloses both sides of the travel setting.
I5 GL 8 7 0% +111%
Thr6 GL fr --- 0% +100%
Gyr7 GL fr --- 0% +100%
I8 GL fr --- 0% +100%
Normal
TYP – travel +
Offset
To set asymmetric travel, the respective control (pro-
portional control or switch) is to be moved to the side
to be set such that the marker frame only encloses
the value to be changed.
I5 GL 8
Thr6 GL fr
Gyr7 GL fr
I8 GL fr
+100% 0.0 0.0
Normal
+100% 0.0 0.0
TYP
+100% 0.0 0.0
Briefly tap the centre
+100% 0.0 0.0
to activate value setting. The value field is shown
highlighted. Values can be changed with the selection
–time+
keys of the right touch pad.
I5 GL 8
Thr6 GL fr
fr
Gyr7 GL
I8 GL fr
Normal
TYP
I5 GL 8
GL fr
Thr6
Gyr7 GL fr
I8 GL fr
Normal
+88% 0.0 0.0
TYP
+100% 0.0 0.0
Another brief tap on the centre
+100% 0.0 0.0
touch pad will complete the entry.
+100% 0.0 0.0
Negative and positive parameter values are possible
in order to appropriately adapt the control's direction
–time+
or effect.
A simultaneous tap on the  or  keys of the
right touch pad (CLEAR) will reset the changed pa-
rameter displayed in inverse video back to "+100 %".
7 0% +111% +100% 0.0 0.0
--- 0% +100% +100% 0.0 0.0
--- 0% +100% +100% 0.0 0.0
--- 0% +100% +100% 0.0 0.0
Offset – travel + –time+
SET
key of the right touch pad
7 0% +111% +111% 0.0 0.0
--- 0% +100% +100% 0.0 0.0
---
0% +100% +100% 0.0 0.0
--- 0% +100% +100% 0.0 0.0
Offset – travel + –time+
7 0% +100% +88% 0.0 0.0
--- 0%
+100% +100% 0.0 0.0
--- 0% +100% +100% 0.0 0.0
--- 0% +100% +100% 0.0 0.0
Offset – travel + –time+
SET key of the right
Program description - Control adjust | Helicopter models
Important:
In contrast to altering servo travel, changing the
control travel setting affects all "downstream" mixer
and coupling inputs, i. e. any and all servos that could
be actuated by the transmitter controls concerned.
Column "– time +"
Each of the function inputs, I5 ... 16, can be assigned
a symmetric or asymmetric time delay of between 0
and 9.9 s.
Move the marker frame to the right beyond the col-
umn labeled "– travel +" with the  selection key of
the left or right touch pad.
To set a symmetric time delay, i. e. control-side inde-
pendent, move the affected transmitter control (pro-
portional control or switch) as necessary to a position
such that the marker frame encloses both sides of the
time setting.
I5 GL 8 7 0% +111%
Thr6 GL fr --- 0% +100%
Gyr7 GL fr --- 0% +100%
I8 GL fr --- 0% +100%
Nor mal
TYP Offset – travel +
To set an asymmetric time delay, move the affected
operating element (transmitter control or switch) as
necessary to a position such that the marker frame
encloses only the value to be changed.
+111% 0.0 0.0
+100% 0.0 0.0
+100% 0.0 0.0
+100% 0.0 0.0
–time+
125