Table of Contents
Advertisement
This display visualizes the data of an HoTT compat-
ible microcopter. It means from left up to right down:
Value
Explanation
V
current voltage
„0:00"
Power on time
mAh
Capacity used in actual power on time
„0"
Satellites position number
km/h
Average speed over ground as relieved
by GPS system
Alt
current altitude
Dir
Direction
I
Actual current
m
Distance from start as relieved by GPS
system
°
Position in degreeses related to start as
relieved by GPS system
In the blank in the above figure line of the display any
messages Mikrokoptersensors display.
BAT 1
0.0V
0.0A
0mAh
This display depicts current voltage, current current
draw and, if attached, the expended capacity of "Batt
1" connected to the Electric-Air module (No. 33620).
44
Transmitter description - Telemetry data display
SENSOR 1
SENSOR
0.0V
If attached, this display depicts currently measured
voltage and temperature from a temperature/voltage
sensor (No. 33612 or 33613) connected to "T(EMP)1"
of the Electric-Air module (No. 33620).
SENSOR 2
SENSOR
0.0V
If attached, this display depicts currently measured
voltage and temperature from a temperature/voltage
sensor (No. 33612 or 33613) connected to "T(EMP)2"
of the Electric-Air module (No. 33620).
Vario
0.0
If attached, this display will depict the altitude
(in m) relative to location, starting location as well as
the current rate of ascent/descent (in m/s) data origi-
nating from a Vario integrated into a Electric-Air mod-
ule (No. 33620).
Speed display
1
0°C
Subject to availability of the corresponding sensor,
this display visualizes the current speed over ground.
"lowest cell"
CELL0=0.00V
2
0°C
Subject to availability of the corresponding sensor,
this display visualizes the current lowest cell voltage
of the connected LiPo battery pack so as the number
of the corresponding cell.
0
m
m
s
0
km/h
Advertisement
Table of Contents
