Selecting A Method For Connecting The Machine To A Computer; Network Connection And Configuration - Canon Color imageCLASS MF8350Cdn Starter Manual

Selecting a Method for Connecting the
Machine To a Computer
There are two ways to connect the machine to a computer: Network connection and USB connection, so select the
connection type according to your environment or function.
* The functions of USB connection and network connection can be used simultaneously.
• For Network Connection

Network Connection and Configuration

Network Connection and Configuration
1.
Connect a LAN cable.
2.
The machine sets the IP address
automatically.
Wait approximately 2 minutes.
If you want to set the IP address manually, see the following.
e-Manual "Setting IPv4 Address"
e-Manual "Setting IPv6 Address"
10
P. 10
Connect the cable.
• For USB Connection
Installing the Driver/Software
About the LAN cable
•
The machine does not come with a LAN cable or a hub.
Have cables or a hub ready as needed.
•
Make sure that the Use a Category 5 or higher twisted pair cable for the
LAN.
green indicator of
the LAN port is on.
About obtaining the IP address
automatically (AutoIP)
<DHCP> or <Auto IP> is enabled in the default setting.
Even if you do not set the IP address manually, this
machine can obtain it automatically.
• Even if you do not have a dedicated device such as a
DHCP server, the IP address is obtained automatically.
• The <DHCP> setting is prioritized over <Auto IP>.
If a fixed IP address is set as the IP address of the
computer, set the fixed IP address also for this machine
manually.
If the IP address of the machine is changed
When the machine and computer are on the same subnet,
the connection is maintained.
P. 11
If the indicator is not turned on
Check the following.
•
Whether the machine and hub are
connected using a USB cable
•
Whether the power of the machine is
turned ON