Table of Contents
Advertisement
Completely independent of this specification, the control mode
can be individually adjusted at any time for both new and existing
model memories. To do this, switch to the end of the selection list
in the „Model type" submenu by swiping the selection list to the
left with one finger or by pressing the lower left button.
Change control mode individually step-by-step
1. If necessary, switch to the „green" tab of the „Basic" menu.
2. If necessary, touch the „Model type" field.
3. If necessary, swipe the model type selection to the left or press
the lower left button to get to the end of the selection list.
4. Touch the „Control mode" field.
The „Control mode" selection window shown on the left is dis-
played.
5. Select the desired control mode or touch „Back" to return to the
previous screen without changing the control mode.
Change control mode preset
Change default control mode step-by-step
1. Switch to the „blue" tab of the system menus.
2. Tap the „System Set" field in the top left
3. The „Mode X" field located below the label „Control mod. Pre-
set." in the middle of the lower edge of the display - to be
touched until the desired control mode is visible repeatedly.
Screen lock
In the basic display of the transmitter, the input lock of the screen
is activated by pressing the two lower selection keys simultane-
ously for approx. 1 second.
• The key lock functions displayed by a lock symbol. The controls
remain operational.
• Pushing the two lower selection buttons again for approx.
1second releases the lock.
Screenshot-Funktion
This option, in the „Display" menu of the „blue" system menu, is a
practical aid not only when creating display images for this man-
ual, but also, for example, for creating documentation on model
settings and for passing on settings to other model pilots, etc.
30 / 64
Create model ...
Define model type
33040_mc32exHoTT_V1.00_en
33040_mc32exHoTT_V1.00_en
Creating a new model step-by-step
1. If necessary, switch to the „green" tab of the „Basic" menus.
2. Tap the „Model List" field in the top left.
3. Touch the model number in the „No." column.
A bar with symbols appears at the bottom edge of the display
4. Tap the plus sign.
The display for entering the model name opens. For example
„Airbus H145".
Upper and lower case as well as numbers and special charac-
ters can be used
5. After entering the model name and confirming it by tapping the
button
at the bottom right, the „New model" display opens
with the model name created by you in the „Name" line, see the
screenshot on the left.
Define model type step-by-step
1. In the „New model" display, tap the model type symbol below
the „Model type" field to select a different model type from the
„Airplane" model type shown here as an example, the model
type „helicopter".
After tapping the helicopter icon, the display will revert to the
New Model screen with the helicopter icon under Model Type
and the icon row options appropriate to the selected model
type.
2. Now define the desired model type based on the options offered.
In the case of the „helicopter" model type selected here as an
example, these would be the options „swash plate type" and
„throttle minimum front or rear". Further options become visible
after moving the options bar to the left by swiping or pressing
the lower button on the left of the display and can also be
selected or left as it is, such as the control mode ... if the control
mode is preset when setting up, the transmitter is the right one.
3. Once the desired model type has been put together and given
the appropriate model name, the blue "Create & select" button
31 / 64
Advertisement
Table of Contents
