Htu Sensor Cable (Bin-Full Send And Receive) Removal - Lexmark X792 Service Manual

7562
3.
Press the tabs to release the sensor, and then disconnect the cable to remove the sensor.

HTU sensor cable (bin-full send and receive) removal

1.
Remove all output options from the printer.
2.
Remove both bin-full sensors. See
and "HTU card (bin-full receive card and lens) removal" on page
3.
Route the cable through the frame.
4-372
Service Manual
"HTU card (bin-full send card and lens) removal" on page 4-340
4-339.