Finisher or stacker output bin extension removal
See"Finisher assembly" on page 7-32
While pulling out the extension, push in the left and right tabs, and pry up the center tab.
Finisher or stacker output bin LED and LED lens removal
See"Finisher assembly" on page 7-32
1.
Remove the option from the printer.
2.
Remove the top cover. See
3.
Remove the screw (A), and then disconnect the cable to remove the beacon LED.
4.
Remove the screw (B) to remove the lens.
for the part number.
for the part number.
"Finisher or stacker top cover removal" on page
7562
4-333.
4-319
Repair information