Lexmark X792 Service Manual page 49

Paper jam in the standard exit bin:
1.
Firmly grasp the paper on each side, and then gently pull it out.
Note: Make sure all paper fragments are removed.
2.
From the operator panel, touch Continue, jam cleared.
Paper jam in the fuser:
1.
Open the left access door.
2.
Open the fuser access door.
3.
Firmly grasp the jammed paper on each side, and then gently pull it out.
Note: Make sure all paper fragments are removed.
4.
Close the door.
5.
From the operator panel, touch Continue, jam cleared.
Paper jam under the fuser:
1.
Open the left access door.
2.
If the paper is not visible, then remove the fuser unit.
3.
Firmly grasp the jammed paper on each side, and then gently pull it out.
Note: Make sure all paper fragments are removed.
4.
Reinstall the fuser.
5.
Close the door.
6.
From the operator panel, touch Continue, jam cleared.
1
2
7562
2-9
Diagnostic information