Accessing service menus
There are different test menus that can be accessed during POR to identify problems with the printer.
Diagnostics menu
Configuration menu
Network SE menu
SE menu
1. Turn off the printer.
2. Press and hold 3 and 6.
3. Turn on the printer.
4. Release the buttons when the splash screen
appears.
1. Turn off the printer.
2. Press and hold 2 and 6.
3. Turn on the printer.
4. Release the buttons when the splash screen
appears.
While in Network/Ports Menu, press and hold 9, 7,
and 6.
From a browser, add "/se" to the device IP address
(for example: http://158.183.3.2/se)
The Diagnostics menu group
contains the settings and
operations used while
manufacturing and servicing the
printer.
For more information, see
"Diagnostics mode" on
page
3-8.
The Configuration menu group
contains a set of menus, settings,
and operations which are
infrequently required by a user.
Generally, the options made
available in this menu group are
used to configure a printer for
operation.
See
"Configuration Menu" on
page 3-27
for more information.
Diagnostic aids
7562
3-7