7562
MPF wear strips removal
See
"Left and rear covers" on page 7-5
1.
Open the left access door assembly.
2.
Insert a flat-blade screwdriver behind the top of the strip, and then twist the screwdriver to pop out the strip.
Operator (OP) panel assembly removal
1.
Remove the scanner top cover. See
2.
Remove the AIO front upper cover. See
3.
Remove the AIO front lower cover. See
4.
Remove the scanner left side front cover. See
5.
Remove three screws (A) from the top.
4-98
Service Manual
for the part numbers.
"Scanner top cover removal" on page
"AIO front upper cover removal" on page
"AIO front lower cover removal" on page
"Scanner left side front cover removal" on page
A (88A0323)
4-195.
4-3.
4-2.
4-193.