Adf Pick Pad Cover Assembly Removal - Lexmark X792 Service Manual

Installation note: Make sure the notch (C) in the ADF media pinch pad fits around the ADF first scan sensor.

ADF pick pad cover assembly removal

See "ADF covers" on page 7-20
1.
Remove the ADF document tray assembly. See
page 4-153.
2.
Remove the ADF separator roll. See
3.
Remove the three screws (A).
4.
Lift to remove the ADF pick pad cover assembly.
for the part number.
"ADF document tray assembly removal" on
"ADF separator roll removal" on page
7562
4-173.
4-167
Repair information