7562
Installation note: Be sure to align the rails with the slots in the back of the printer to slide them into place, and
then fit them over the pins on the front of the printer.
MPF breakaway assemblies removal
See
"Left" on page 7-11
1.
Remove the rear cover. See
2.
Remove the standard media tray. See
3.
Gently lay the printer on its back.
4.
Remove the screw (88A0212) from the LVPS.
4-86
Service Manual
for the part numbers.
"Rear cover removal" on page
"Standard media tray removal" on page
4-21.
4-133.