5-Bin Mailbox Feed Motor With Plate Removal - Lexmark X792 Service Manual

5-bin mailbox feed motor with plate removal

1.
Remove the mailbox from the printer.
2.
Remove the mailbox front cover. See
3.
Remove the printer circuit board. See
4.
Remove four screws (A), and remove the feed motor side plate.
5.
Squeeze the tabs and push up to release the option connector, and then slide the plate over the cable to
remove it.
"5-bin mailbox front cover removal" on page
"5-bin mailbox controller card removal" on page
7562
4-298.
4-295.
4-297
Repair information