Lexmark X792 Service Manual page 360

7562
9.
Remove four screws (D) from the bottom, and remove the operator panel bottom cover.
Note: If you are removing the operator panel assembly to replace the OP panel speaker, then stop here and go
to step 2 of "OP panel bottom cover removal" on page
10.
Remove two screws (E), and remove the cave light from the OP panel bottom cover.
Note: If you are removing the operator panel assembly to replace the OP panel bottom cover, then stop here
and go to step 2
4-100
Service Manual
D (88A0323)
E (88A0323)
of "OP panel bottom cover removal" on page
4-20.
4-20.