Adjusting Scanner Registration - Lexmark X792 Service Manual

7562
4.
Navigate to:
SCANNER CALIBRATION > Copy Quick Test.
5.
Compare the copy to the original page. If the copy is skewed, then use the following instructions to correct
the issue.
Use the examples below to determine if the skew is positive or negative; this will help with determining the correct
adjustment to make.

Adjusting scanner registration

Before adjusting skew, be sure the scanner registration is within acceptable parameters.
Note: If the printer menus do not match the following instructions, then contact your next level of support.
1.
Enter the Configuration menu: press and hold 2 and 6, turn on the printer, and release the buttons when
the splash screen appears.
2.
Navigate to:
Scanner Manual Registration > Print Quick Test
3.
Adjust the flatbed:
a. Place the printed test page facedown on the flatbed scanner glass, and select Copy Quick Test.
b. Compare the copy to the original test page.
c. Select Flatbed, and adjust the left and top margins as needed.
d. Touch Submit to save your changes.
e. To check the changes, reload the original test page, and then repeat the Copy Quick Test. Repeat the
steps as needed.
4.
Adjust the ADF Front:
a. Place the latest test page faceup in the ADF, and select Copy Quick Test.
b. Compare the copy to the original test page.
c. Select ADF Front, and adjust the horizontal adjust and top margins as needed.
d. Touch Submit to save your changes.
e. To check the changes, reload the original test page, and then repeat the Copy Quick Test. Repeat the
steps as needed.
5.
Adjust the ADF Back:
a. Place the latest test page facedown in the ADF, and select Copy Quick Test.
b. Compare the copy to the original test page.
c. Select ADF Back, and adjust the horizontal adjust and top margins as needed.
d. Touch Submit to save your changes.
e. To check the changes, reload the original test page, and then repeat the Copy Quick Test. Repeat the
steps as needed.
6.
Touch Back to return to the Configuration Menu.
4-384
Service Manual