280-289 Paper Jams - Lexmark X792 Service Manual

280–289 paper jams
1.
Remove all original documents from the ADF.
2.
Open the ADF door.
3.
Grasp the jammed paper on both side, and then gently pull it out.
Note: Make sure all paper fragments are removed.
4.
Close the ADF door.
5.
Flex and stack the original documents.
6.
Reload the original documents into the ADF, and then adjust the paper guide.
7.
From the operator panel, touch Continue.
Additional checks—280–289 paper jams
Error code
280.06
282.01
282.03
283.01
Description
Paper missing.
Scanner Static Jam—ADF skew
sensor
Scanner Static Jam—ADF pickup jam
Scanner static jam—scanning sensor.
Action
• Remove all media present in the media path.
• Check the ADF input sensor for proper
operation. Go to "280.06—Media missing jam
service check" on page
• Remove all media present in media path.
• Check the ADF skew sensor for proper
operation. Go to "282.01—Sensor (ADF sheet
through) static jam service check" on
page 2-112.
• Remove all media present in the media path.
• Check for obstructions in the media path.
• If the problem persists, go to
(ADF sheet through) late jam service check"
on page 2-113.
• Remove all media present in media path.
• Check ADF scanning sensor for proper
operation. Go to "283.01—Sensor (1st scan)
static jam service check" on page
Diagnostic information
7562
2-111.
"282.03—Sensor
2-114.
2-21