5062
HTU sensor (second) removal
1.
Remove all output options from the printer.
2.
Remove the HTU lower redrive guide. See
3.
Press the tabs to release the sensor, and then disconnect the cable to remove the sensor.
HTU sensor cable (bin-full send and receive) removal
1.
Remove all output options from the printer.
2.
Remove both bin-full sensors. See
and
"HTU card (bin-full receive card and lens) removal" on page
3.
Route the cable through the frame.
4-324
Service Manual
"HTU lower redrive guide removal" on page
"HTU card (bin-full send card and lens) removal" on page 4-288
4-297.
4-287.
Previous
Next
Go Back