7562
OP panel bottom cover removal
See
"Front, right, and top covers" on page 7-3
1.
Remove the operator panel assembly. See
2.
Remove one screw (A), and remove the speaker.
Printhead access cover removal
See
"Front, right, and top covers" on page 7-3
1.
Remove the AIO option cover. See
Note: If you have any output options installed, then the option cover is already removed. Remove the
output options and redrive unit instead.
2.
Remove three screws (A), and lift to remove the cover.
4-20
Service Manual
for the part number.
"Operator (OP) panel assembly removal" on page
for the part number.
"AIO option cover removal" on page
A (88A0323)
A (88A0323)
4-3.
4-98.