Htu Output Bin Removal - Lexmark X792 Service Manual

Rear roller
a.
Remove the rear standard bin cover. See
b.
Remove the screw (A) to remove the roller.

HTU output bin removal

1.
Remove the output option from the HTU.
2.
Rotate the bin up, and then pull back to remove it.
Installation note: If you are replacing the output bin FRU, then remove the wire stop. See
wire stop removal" on page
"HTU rear standard bin cover removal" on page
4-355.
7562
4-360.
"HTU output bin
4-353
Repair information