200 Paper Jam - Lexmark X792 Service Manual

7562
Area Jam number
4 280–291

200 paper jam

1.
Open the left access door.
2.
Firmly grasp the jammed paper, and then gently pull it out.
Note: Make sure all paper fragments are removed.
3.
Close the door.
4.
From the operator panel, touch Continue, jam cleared.
Additional checks—200 paper jam
Error code
200.01
200.02
200.03
2-4
Service Manual
What to do
Remove all paper from the ADF, and then remove the
jammed paper.
Description
Input sensor is made when printer
powers up or covers are closed.
Possible causes:
• Paper jam leaving page over
sensor
• Defective input sensor
• Faulty system board
Paper hit the input sensor too soon.
Possible causes:
• Damaged input sensor flag or
input sensor
• Loose input sensor
Input sensor is never made or made
late.
Possible causes:
• Faulty input sensor
• Faulty staging deflector assembly
• Faulty autocomp assembly
See
"280–289 paper jams" on
page 2-21
Action
• Clear away anything in the paper path that might
cause the paper to jam.
• If clearing a paper jam does not fix the problem,
go to "Input, S1, narrow media, and near
narrow media sensor service check" on
page 2-142.
• Clear away anything in the paper path that might
cause the paper to jam.
• The input sensor may not be functioning
properly. Go to "200.02—Paper Jam error
service check" on page
• Clear away anything in the paper path that might
cause the paper to jam.
2-88.