149.xx—Paper path redrive motor error service check
Step
Questions / actions
1
Turn the printer off, and open the system
board shield. Check the cable in connector
JRDR1 for proper connection to the system
board.
Is the cable properly connected?
2
Replace the staging deflector assembly. See
"Staging deflector assembly removal" on
page
4-126.
Does the error reoccur?
150.xx—Duplex motor error service check
Step
Questions / actions
1
Open the left access door assembly, and
check the duplex assembly gears for damage.
Is the duplex assembly damaged?
Yes
Go to step 2.
Replace the system board.
See
"System board
removal" on page
4-133.
Yes
Replace the duplex
assembly. See
"Staging
paper path reference
edge assembly removal"
on page
4-128.
7562
No
Reseat the cable.
Problem solved.
No
Go to step 2.
2-83
Diagnostic information