200.43, 200.48—Paper Jam error service check
Step
Questions / actions
1
Remove the input tray.
Are the pick tires worn?
2
Open the left access door. Check the narrow
media sensor flag (C) for damage.
Is the narrow media sensor flag damaged?
3
Is the staging deflector assembly
damaged?
4
Turn the printer off, and open the system
board shield. Check the cable in connector
JPP2 for proper connection to the system
board.
Is the cable properly connected?
Yes
Replace the pick tires. See
"Pick rolls removal" on
page
4-118.
Replace the narrow media
sensor flag. See
"Sensor
(input, S1, narrow media,
near narrow media)
removal" on page
4-133.
Replace the staging
deflector assembly. See
"Staging deflector
assembly removal" on
page
4-135.
Go to step 5.
7562
No
Go to step 2.
Go to step 3.
Go to step 4.
Reseat the cable.
2-97
Diagnostic information